Glass Entrance Doors

Nu-Star Entrance Doors are fabricated to your particular configuration . All we need is your dimensions and we will take care of the rest.

In house production capabilities includes technical design, layout, extrusion, architectural hardware , glass fabrication and sandblasting along with cladding

This forms Nu-Star Glass & Mirror into a ONE STOP SHOP

 

Nu-Star Glass and Mirrors business affiliate PRL  manufactures many standard and custom Tempered Frameless All Glass Entrance Door Styles. We carry a wide selection of rail styles and patch fitting for all our all glass doors. The beauty of glass entrances, commonly referred to as “all glass doors”, is that they appear frameless, allowing for maximum vision and minimal obstruction to your building entry. Our Tempered All Glass Doors can be made with 3/8″, 1/2″, 5/8″ or 3/4″ heavy tempered glass or tempered laminated glass.

Nu-Star Glass and Mirrors offers Complete Systems, packages including all door hardware and framing (we are your one stop shop!). Choosing all glass door design and style depends on many factors like aesthetics, meeting ADA code, hardware requirements or whether it’s for an exterior or interior application.

 

All Glass Entrance Door Systems

Sliding Door Hardware

Tempered glass or laminated tempered glass

  • Tubular Panic Device all In-House manufactured
  • Standard or custom pulls
  • Floor closer or overhead closer
  • OHC installed in headers
  • Door rails 3-5/16″ up 10″
  • Custom rail heights are available
  • Center Lock & Strike Housings
  • Patch fittings
  • Tiffany system
  • Ruby system
  • Barn Door Hardware
  • Starphire (Low Iron)
  • Acid Etched
  • Sandblasted
  • Bronze or Gray
  • Clear
  • Azurlite
  • Blue Green
  • Custom colors (laminated)

Nu Star Glass and Mirrors  All Glass Entrance Systems Catalog

Custom All Glass Entrance Doors

Custom clad entry doors are manufactured in Simi Valley California. We have three types of standard clad styles and the ability to produce custom glass clad doors. The architectural metal department offers custom break formed cladding shapes to compliment the clad entry doors. Our team is ready to take your custom field dimensions and we will take care of the rest.

Stainless steel, oil rubbed bronze clad doors and brass clad, custom doors are a sure way to turn any basic entrance into an exquisite entry. Both the stainless steel doors and the brass doors are available in either a #4 brushed finish or a #8 polished finish. The top and bottom rails are stocked in standard 4″, 5″, & 10″ heights, however PRL Glass can customize based on the entries design requirements and hardware. The clad door is design to improve the weather control.

In addition, Nu=Star Glass and Mirrors  manufactures all surrounding clad storefront frames and different pulls to compliment each doors custom design. Nu-Star Glass and Mirrors extrudes all of our own dies in the U.S. at our own facility and we offer all standard storefront frames from 1-3/4 x 4, 1-3/4 x 4-1/2, 2 x 4-1/2, as well as custom sizes based on your job requirements. Our custom glass clad doors are glazed and ready to install. We have various types and thicknesses of glass available.

The Most Common Glass Door Styles:

P-Style All Glass Door

Continuous horizontal top and bottom rails from any PL-Series rails (3-3/8″ tall to 10″ tall, and custom).

BP- Style All Glass Door

Corner patch rail in a 9-1/2″ section from any PL-Series rails or PL-Euro series patch fittings (2″ x 6-1/2″) located at top pivot corner, with continuous horizontal bottom rails from any PL-Series Rails.

F-Style All Glass Door

Patch rails at top and bottom pivot corners and at one leading corner of the door for accommodating a lock in a 9-1/2″ section from any PL-Series rails or PL-Euro Series fittings.

A-Style All Glass Door

Corner patch rails at top and bottom pivot corners (no lock fitting) in a 9-1/2″ section from any PL-Series rails or PL-Euro Series fittings.

WS450-Style All Glass Door

1-3/16″ narrow vertical stile “I-Line” door with continuous top and bottom rails from any PL-series rails.

Available Metal finishes:

  • Stainless steel (brushed #4 or polished #8)
  • Brass (satin or polished)
  • Anodized aluminum (clear & bronze)
  • Custom Powder Coat or Kynar Paint